Universal Remote Control (URS) A6 - Manual (Page 28)

Page 28
Erasing MacroPower & Other Macro
Commands
STEP 1: To erase MacroPower commands on the
POWER ON or SYSTEM OFF button, press and
hold either the POWER ON or SYSTEM OFF
button and the MUTE button simultaneously for
two seconds until the current status component
LED turns on.
IMPORTANT: If you don’t proceed to the next
step within 30 seconds, the LED will turn off and
exit set-up mode and you will need to start over.
STEP 2: Press the CHANNEL UP button to erase
and exit Erase mode. The component LED light will
blink three times to confirm the erasure.
NOTE: To erase other Macros, simply press the
appropriate button in Step 1 in combination with
the MUTE button.
POWER
ON
SYSTEM
OFF
CHANNEL
UP
MUTE