Universal Remote Control (URS) A6 - Manual (Page 20)

Page 20
SimpleSound™ Total System Volume
Control
SimpleSound is one of the most exciting features of
the URC-A6. It gives you total volume control over
ALL the components in your system, even those
that do not have built--in volume control, such as
TIVO, DVD and VCR. SimpleSound saves you the
hassle and inconvenience of constantly switching
between component modes just to control volume.
First you should identify which device in your
system will be used to deliver sound. In a basic
system, the sound may come from your TV speaker.
In a more advanced system, the sound may come
from your audio components (such as a Surround
Sound Receiver or Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that
corresponds to the Component you want to add
volume control to (such as a DVD or DVR) and the
SELECT (SEL) button at the same time for about
three seconds until the component LED light turns on.
IMPORTANT: You have 30 seconds to perform
the next step while you are in programming mode.
If you do not press a button within 30 seconds, the
component LED light will turn off. The remote will
exit the programming mode and you will have to
start over.
COMPONENT
BUTTONS
SELECT