beautypg.com

Please do not return, This product to the store – Universal Remote Control (URS) A6 User Manual

Page 12

background image

Page 12

STEP 4: Once you have found the right code
number and the component has turned off, press
the POWER button on the URC-A6 remote to turn
the component back on.

Next test the VOLUME and CHANNEL buttons (or
PLAY and STOP buttons for DVD and DVR) to
make sure they all work. If any of the buttons do
not work properly, you need to find a new code.
Continue pressing the UP (or DOWN) arrow
button until you find a new code that turns off the
component and makes the VOLUME or PLAY
buttons respond correctly.

STEP 5: Once you have found the right code, you
must save it. Press the component button you just
programmed (in this case TV) one more time to
save the code number. The component LED light
will blink three times to confirm that the code was
successfully stored. Now when you press the TV
component button, all of the buttons will work with
your TV.

NOTE: Use this method for those components you
cannot program with either the Quick Set-Up or 3-
digit Code Entry Methods.

IMPORTANT: If you cannot find the right code
after 5 minutes of trying the Auto-Search Method,
try the Learning Method (page 13).

PLEASE DO NOT RETURN

THIS PRODUCT TO THE STORE

PLEASE CONTACT OUR TECHNICAL

SUPPORT CENTER

IF YOU NEED ASSISTANCE, E-MAIL

[email protected]

or dial

1-800-901-0800

(9:00AM-6:00PM EST)