Tycon Power RPPL2424-18-30 - Manual (Page 7)

7
external controller, You will need to mount the controller inside the en-
closure and connect the output of the controller to the batteries. The
connection will be in parallel with the existing solar controller connec-
tion.
9. POE SWITCH: Tycon Power offers a
universal voltage 5port and 8port POE
switch if more than one device needs to
be powered from the battery system.
The TP-SSW5-NC, TP-SW5G-NC and
TP-SW8-NC offer the unique feature
that the voltage supplied to the switch is
the POE voltage sent to the devices. So
24VDC in and you get 24VDC POE to
the devices. The operating voltage is 12V to 56VDC.
10. OTHER ACCESSORIES: Tycon also offers a variety of voltage
conversion products to meet almost any need. Just visit tyconpow-
er.com for more info.
Limited Warranty
The RemotePro™ products are supplied with a limited 24 month war-
ranty which covers material and workmanship defects. This warranty
does not cover the following:
▫ Parts requiring replacement due to improper installation, misuse,
poor site conditions, faulty power, etc.
▫ Lightning or weather damage.
▫ Physical damage to the external & internal parts.
▫ Products that have been opened, altered, or defaced.
▫ Water damage for units that were not mounted according to user
manual.
▫ Usage other than in accordance with instructions and the normal
intended use.
NOTES