Tycon Power TPDIN-Monitor-WEB - Manual (Page 6)

6
State Of Charge Sealed or Flooded
Lead Acid
GEL Battery AGM Battery
100% 12.7+Volts 12.9+Volts 12.8+Volts
75% 12.4 Volts 12.7 Volts 12.6 Volts
50% 12.2 Volts 12.4 Volts 12.3 Volts
25% 12.0 Volts 12.0 Volts 12.0 Volts
10% 11.8 Volts 11.8 Volts 11.8 Volts
Voltage Meas (DC) V1, V2, V3, V4 = 1-80VDC
Voltage Meas Accuracy +/- 0.1V
Current Meas (DC)
I1, I2 = 0.1A to 20A
I3, I4 = +/-10A
Current Meas Accuracy +/- 0.1A
Temperature Meas T1,T2 = -40C to 125C
Temp Meas Type T1 = Embedded, T2 = External Sensor (included)
Temp Meas Accuracy +/- 1 degC
Relays (Normally Closed
Type)
R1, R2, R3, R4 = 10A DC
Relay Control
R1, R2 = Manual or Ping or Time Control
R3, R4 = Manual or Temperature Control
Power Requirements
10-58VDC Wire Terminal or 802.3af Class 0 POE,
3W Typ
Accessibility Via Web Browser and SNMP
Data-Logger FIFO, Max 1300 data sets, Program log interval
Connections Removable Wire Terminal
Wire Size 12AWG Max
Mounting DIN Rail
Operating Temperature -40C to +75C (-40F to 167F)
Humidity (RH) 0% - 90%
Dimensions (LxWxH) 125 x 102 x 46mm (4.9” x 4” x 1.8”)
Weight 410g (14.5 oz)
5. Operating Power: The TPDIN-Monitor-WEB has extremely low op-
erating power, typically less than 3W. The relays are normally closed
type so in typical operation they don’t take any power until they are en-
ergized. If the relays are turned on to hold them open, the power usage
will increase.
6. SNMP: The TPDIN-Monitor-WEB can be controlled via SNMP for
automated operation. Setup the SNMP on the SNMP page in the web
interface. The unit will respond to SNMP queries to gather data and
control relays from a script running on a remote computer. The unit
doesn’t allow setting of local SNMP traps.
Specifications