Tycon Power TP-SW5G(-NC) - Manual (Page 3)

User’s Manual TYCON TP-SW5G(-NC) series
TYCON POWER SYSTEMS 3
1. General Information
The PoE (Power Over Ethernet) Switch family provide four 10M/100M/1000M TX ports with PoE PSE
function plus one 10M/100M/1000M TX up-link port with PoE PD function. It allows power souring
equipment (PSE) to be powered from PoE and deliver power to PoE powered device (PD), which are
compliant with IEEE802.3af and IEEE802.3at standard to receiver and deliver both Ethernet data and DC
power through the traditional UTP or STP cable. The PoE Switch can extend Ethernet data and DC power
up to 200 meters. This manual will help you install and maintain the PoE switch. Installation of the PoE
switch is very easy and you can start to use the product as soon as you are powered up.
2. Hardware Description
*LED Indicator
There are 12 LEDs on the PoE switch to indicate the status of power and signal. The following section
describes the functions of each LED indicator.
Front panel detail