Tycon Power TP-SW5G(-NC) - Manual (Page 13)

User’s Manual TYCON TP-SW5G(-NC) series
TYCON POWER SYSTEMS 13
4. Technical Specifications
Standards IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10
base-T/100base-TX/1000base-T)
Ports 5 ports with PoE (4 PSE & 1 PD), support auto-crossover &
auto-polarity
Transmission speed 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T)
Auto-negotiation
Switch technology store-and-forward
Protocols CSMA/CD
Flow control IEEE802.3x (full-duplex), back pressure (half-duplex)
Data transmission rate 1488000pps for1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
Address table 1K MAC address table, self-learning
Connect RJ-45
PoE port Port 1-4, PSE auto power management
Pin assignment: data pair A(1,2),data pair B(3,6),data pair C plus
V+(4,5),data pair D plus V-(7,8)
Port 5, 4 pairs PD
Maximum PoE power Port 1-4: IEEE802.3af – 16.8W
IEEE802.3at – 35W
Current limited – 1A, total 4A maximum
(Total power for TP-SW5G24 – 70W)
Port 5: 90W (802.3at 2 event classification)
Current limited – 1A
TP disconnect mode DC disconnect