Tycon Power UPS-ST2424-50-UBNT User Manual
Page 3
3
the pole mount kit to the back of
the enclosure and mount the en-
closure to a pole using the 6 hose
clamps provided. The enclosure
can also be wall mounted using
the 4 holes in the back of the en-
closure.
STEP 6:
Insert the battery plat-
form in the bottom of the enclo-
sure. The battery plat-
form has cutouts so
wires can be routed un-
der the battery as need-
ed.
STEP 7:
Attach the
green DIN Rail adapters to the charge con-
troller and 5 port POE switch using the
screws provided. Clip the controller and POE
switch to the DIN rail.
STEP 8:
Connect a two conductor wire be-
tween the back green connector on the con-