Qwik install – Tycon Power UPS-ST24-100-8-UBNT User Manual

Page 2

Qwik Install

STEP 1:

Add Grounding Wire

Between Door and Enclosure:

Remove plastic covers on cop-

per studs on inside of door and

inside of enclosure. Add jumper

wire between 2 copper studs

and use copper washers and

nuts to secure.

STEP 2:

Add wire feedthrus into

the bottom connector plate. Attach the connector plate to the bottom of

the enclosure using self tapping screws provided.

STEP 3:

Install hole plug in drain hole in bottom right corner of the en-

closure.

STEP 4:

Mount the DIN rail to the door using screws provided. Mount

any extra equipment to the orange backplate and secure the backplate

in the enclosure. Note: The DIN rail can also be mounted to the orange

backplate if desired.