Torbal BA Industrial Platform - Manual (Page 3)

- 3 -
CAUTION:
• The scale is designed for indoor use only.
• Do not operate the scale in hazardous areas or conditions.
• Do not use the scale in locations subject to high humidity.
• Do not connect cables in ways other than those mentioned in this manual.
• Be sure to set the scale on a firm, stable, horizontal surface.
• Never stand on or lean on this product. Equipment may fall or collapse, causing breakage
and possible injury.
• Before moving the product, unplug it and unplug all cables connected to it.
• When storing, transporting or returning the scale for service, always use the original
packaging.
WARNING:
• Never attempt to repair, disassemble or modify the scale yourself. Tampering with the scale
may result in injury and cause more damage to the equipment.
• Be sure to use the specified power source.
• Do not allow foreign matter to fall into the scale.
• If water or other liquid spills into the scale, do not continue to use it. Unplug the power cord
immediately and contact technical support.
1.1. Important handling Cautions and Warnings
Never drop or throw any articles onto the scale’s
pan or onto any other parts of the unit!
DO NOT let the scale fall or drop from its
tabletop surface!
DO NOT pass or handle liquids directly over the
scale to avoid spillage and liquid damage!
Always handle your scale with care. Damage caused by improper handling is not covered under the
scale’s warranty.