Torbal DRX300 Manual - Manual (Page 26)

Instruction Manual - TORBAL DRX 5 Series
1.4.2.Zeroing the scale
1.The DRX is armed with the Auto Zero Setting Mechanism (AZSM). AZSM automatically maintains a center of zero
condition within +/- .5d or 5mg.
2.The scale may be re-zeroed manually to obtain a new center of zero. To re-zero the scale manually with a weight that
is out of the AZSM range, make sure the weight and the stabilization indicator are shown on the display, i.e.:
3.Re-zero the scale by pressing the zeroing key.
4.The display will show a dotted line, which indicates that the scale has begun the re-zeroing process, i.e.:
5.When finished re-zeroing, the scale will return to Weighing Mode and the display will indicate 0. A new center of
zero has been set, and the scale is ready for weighing.
Note: Re-zeroing the scale will reduce the capacity of the scale by the re-zeroed weight. The remaining capacity is
displayed as a percentage on the right side of the display.
1.4.3.Taring
1.If a container is used for weighing, it may be tared. In taring the container, the scale subtracts the weight of the
container from the gross weight to obtain the net weight.
26