Ring Communications RM5000EX - Manual (Page 34)

RM5000EX Operations Manual March 2011
TELEPHONE LINE INERFACE
The interface may be used as a speed dialer to a telephone number used for answering intercom
calls from elevator intercoms in a night transfer mode of operation. The device type of the interface is
set to PBX. A delay may be entered as P1 for one second delay to P9 for 9 second delay. Example:
P29P31234567 will delay 2 seconds (waiting for dial tone), dial 9, delay 3 seconds, then dial 1234567.
PROGRAMMING
The following commands are used for this feature.
SDT
Set Device Type
LCN List Call Number
SSD Set Speed Dial Number
LSD List Speed Dial Number
SPT Set Privilege Type
Example:
>SDT 27 PBX
cr
>SSD 27 P29P31234567
cr
>SPT 27 7 +
cr
BACKUP
Backup generates programming commands required to restore the configuration of the EX500.
These commands may be downloaded and stored in a file on the PC. This file can then be uploaded to
restore the configuration of the EX500.
PROGRAMMING
The following command is used for this feature.
BAK
Backup
Example:
>BAK
cr
Call Number <100-999/*> : 100-101
cr
!
! BACKUP START: 2009/08/10
!
! EX500 VERSION: 2009/02/06
!
SCN 10 00
SCID 10 SECURITY
Page34
Ring-Master