Reliance Controls Pro/Tran Q Series - Manual (Page 13)

Transfer Switch Parts List
3
Description Part# Description Part#
Circuit breaker, 15 A S.P. 8491 Power inlet, 20 A L1420F
Circuit breaker, 20 A S.P. 8492 Power inlet, 30 A L1430F
Circuit breaker, 20 A D.P. 8493 Power Inlet, 50 A LL550F
Circuit breaker, 30 A D.P. 8494 Handle tie 6295
Wattmeter, 20 / 30 A 7230 Power Inlet Filler Panel 6271
Wattmeter, 50 / 60 A 7231 Electronic Meter 7201
Current Transformer (C.T.) 7222 Electronic Meter C.T. 7223
Switch, 30A SPDT 7801
Optional Accessories
Power Inlet Boxes
Ideal for installations where the house electrical panel is located
indoors. No need to run the power cord from the generator to the
transfer switch through a door or window. This weather-tight power
inlet box can be mounted on the exterior of the house. Run wiring
through the wall from the inlet box to the transfer switch installation
inside. The generator power cord may then be plugged into the
power inlet box.
11
Catalog#
Connector
configuration
Inlet description For use with models
PB20 L14-20 4-wire weather-tight male Q206
L14-30 4-wire weather-tight male Q306 and Q310 PB30
PB50 CS6364 4-wire weather-tight male Q506 and Q510
Power Cords
These heavy duty cord sets are the connecting link
between the generator and the Reliance transfer switch or
the power inlet box. The 4-wire locking plug and connector
match up with the power inlet on each Reliance transfer
switch and with the inlet on the power inlet box. Most
portable generators suitable for 120/240 full-power
operation are supplied with either a 20-amp or 30-amp, 4-wire locking receptacle that
accepts the locking plug and connector on each end of the cord set.