QOMO QD1600 - Manual (Page 8)

Step 2: Connect to the projector.
Projector
RGB Input
Screen
RS232 Cable
AUDIO IN
Rear Panel
AUDIO
OUT
VIDEO S-VIDEO
OUT
VIDEO AUDIO
IN
AUDIO
IN
S-VIDEO OUT-12V- IN OUT -COMPUTER- IN PROJECTOR
RS232 AUDIO IN RGB IN USB MOUSE MIC
Side Panel
Connect visualizer’s PROJECTOR port to the RGB IN port of the projector
port with the RGB cable provided together the visualizer.
If you need control a projector with the visualizer, please use the projector
RS232 cable (9-pin to 9-pin) to make the connection between the projector
and the visualizer. Some projector models may require a converter cable in
addition to this standard RS232 cable to connect to the projector control
port, for the pin locations and shape of some projectors’ control port
connector may be different from the connector of a standard RS232 cable.
After the visualizer is connected to the projector, you can control projector’s
power on, standby and input selection with the visualizer. (For projectors
other than Hitachi, the Code Writing program that comes with the visualizer
is required for this function.)
Step 3: Connect to a desktop computer.
8