QOMO QD1600 - Manual (Page 19)

USB IMAGE CAPTURE
You can capture and control images on the visualizer from a computer
connected with a USB connector.
A. Connect the computer and the visualizer with the USB cable.
B. Double click X:\ USB Capture\setup.
C. click [start] -> [All Programs] -> proscancamera -> proscancamera,
you will see the following computer control window:
The control keys’ operation is the same to the operating instruction of
the “Controlling the Visualizer From a Computer” section.
D. Menu operation instructions.
Display the image in full screen.
Get a present picture frame from CCD.
Save the captured image to computer.
Print the captured image.
19