QOMO QIT600 User Manual

Page 23

PAGE

OSD Control Buttons

Button 1 Power

Button 2 Menu/Enter

Button 3 Up

Button 4 Down

Button 5 Auto

Stylus

■

Charging

Attach either two stylus, which contain lithium
batteries, by connecting the USB charging cable to
the end of the stylus. The tail will be bright green
when charging. Once fully charged, the light will
automatically go out.

■

Twisting the Stylus

The stylus’ silver metal rings in the middle are the
power switch of the stylus. Use one hand to hold
the silver metal rings, and use the other to rotate
around the black part of the stylus. Power switch
operates by twisting the stylus. Twisting to the
opposite direction will power off the stylus.

■

Actual Use

In accordance to the earlier 2 steps by turning on
the stylus power switch, you can begin using the
stylus when it is on. As long as the pressure of the
stylus is on the screen, it will light and can be used
to operate the computer.

Button

POWER
MENU/ENTER
+
-
AUTO

Number

Button 1
Button 2
Button 3
Button 4
Button 5

Function

LCD is used to switch
Used to display the menu in order to modify the display settings
Used to select options and increased up to adjust the amount
Used to down select the option and adjust the volume reduction
Used to automatically adjust the LCD screen to the best
(Only D-SUB input valid)
Used as an adjustment in the menu to leave or return to the previous menu level