Pridiom Concealed Duct Installation Manual - Manual (Page 9)

7
installation manual installation manual
NOTE
Air return flange
Side rail
Seal sponge
Dentilation panel
1. Take off ventilation panel and flange, cut off the staples at
side rail.
2. Stick the attached seal sponge as per the indicating place in
the following fig, and then change the mounting positions of
air return panel and air return flange .
3. When install the filter mesh, please plug it into flange inclined
from air return opening, and then push up.
4. The installation has finish, upon filter mesh which fixing
blocks have been insert to the flange positional holes.
Fig.5-9
How to adjust the air inlet direction? (From rear side to under-side.)
Table.5-2 mm
air outlet opening size air return opening size
Size of
mounted lug
Outline dimension
920 210 635 570 65 713 35 119 815 200 80 960 350
A B C D E F G H I J K L M
920 270 635 570 65 713 35 179 815 260
920 270 635 570 65 713 35 179 815 260 20 960 350
12~18
24
36
(small model)
All the figures in this manual are for explanation purpose only. They may be slightly different from the air
conditioner you purchased.The actual unit shall prevail.
1140 270 775 710 65 933 35 179 1035 260
20 1180 490
45 1240 500
30~36
42~60
1200 300 865 800 80 968 40 204 1094 288 45 1240 500
12 700 210 635 570 65 493 35 119 595 200 80 740 350
(in=mm/25.4)