Oldcastle BuildingEnvelope FG-2000 - Manual (Page 21)

INSIDE GLAZE SILL INSTALLATION AND PERIMETER SEAL
E
E
E
THIS LEG MUST BE
TO THE EXTERIOR
FG-2122
(PARTS SOLD IN
STOCK LENGTHS.)
E
C
D
FG-2000-FP-1
PART #: 7943
F
NOTE: 1/4" WEEP HOLE
REQUIRED IN FLASHING (C)
AT CENTER LINE OF MULLION.
SHIM UNDER SILL FLASHING
SPACE BETWEEN SILL AND FLASHING (C) TO BE
CONTINUOUSLY SEALED EXCEPT FOR 1/4" DIA. WEEP
HOLE UNDER VERTICAL MULLIONS FOR WEEPAGE.
ONCE THE WALL IS SECURED, SEAL GROVE (D)
BETWEEN SILL FLASHING AND BACK OF SILL
FLASHING AND BACK OF SILLS.
THE QUALITY OF THE INSIDE AND OUTSIDE
PERIMETER SEALS (C AND E) MAY BE IMPROVED
BY USING FG-1192 RIGID PVC FILLER.
THE PART MAY BE USED IN FULL LENGTHS OR CUT
INTO PIECES. ITS PURPOSE IS TO PROVIDE
SUPPORT FOR THE BACKER ROD REGUARDLESS
OF JOINT OR SIZE. PERIMETER SEAL (F) IS FOR
COSMETIC PURPOSES AND IS OPTIONAL.
F G - 1 0 0 0 - F G - 2 0 0 0 S T O R E F R O N T I N S T A L L A T I O N M A N U A L
Phone: 1-866-OLDCASTLE (653-2278)
Web Address: www.oldcastlebe.com
20 JFEBRUARY 2012
SEALANT