Modern AG 10' Predator - Manual (Page 50)

50 - 10' Predatorrr
GeARBox
the oil level should be checked and maintained at
a “full” level. to fill, remove the oil fill plug (1), the
overflow plug (2), add oil until oil overflows.
Figure 1.
Note: Make sure cutter is level when checking oil in the
gearbox.
Note: Failure to remove 1/4” overflow plug may cause
overfilling. Overfilling of gearbox will cause pressure to
build up and cause oil seals to leak.
TAILwHeeL:
Grease fitting on hub of wheel. Figure 2. Grease
after every 4 hours. also, a grease fitting is
provided on the tailwheel boom at caster pivot
point. Figure 3. Grease after every 4 hours use to
provide maximum trouble free service.
Figure 1
Figure 2 Figure 3
GeARBox MAInTenAnce
cuTTeR LuBRIcATIon poInTs
Driveline Lubrication
1
2
Tailwheel boom
bushing every
8 hrs.
Tailwheel hub
every 8 hrs.
check fluid in
gearbox daily.