Modern AG 10' Predator - Manual (Page 14)

14 - 10' Predatorrr
Maintenance and service safety continued
• never work under the implement, the framework, or any lifted component unless the implement
is securely supported or blocked up to prevent sudden or inadvertent falling which could cause
serious injury or even death.
• never attempt to lubricate, adjust, or remove material from the implement while it is in motion
or while tractor engine is running. make sure the tractor engine is off, the transmission in park,
the parking brake set, and that the key is with you before working on the implement.
• always disconnect the main PtO Driveline from the tractor before performing service on
the implement. never work on the implement with the tractor PtO driveline connected and
running. Rotating Parts, blades or drivelines could turn without warning and cause immediate
entanglement, injury or death.
• DO nOt weld or repair rotating implement components. Welds and other repairs may cause
severe vibration and/or component failure resulting in part being thrown from the implement
causing serious bodily injury. See your authorized Dealer for proper repair procedures.
• DO nOt weld or perform hot work on galvanized implements. Heating/burning of galvanizing
material may release fumes which can be harmful to your health. (If applicable)
• Do not modify or alter this implement. Do not permit anyone to modify or alter this implement,
any of its components or any implement function.
sAFeTy secTIon