Modern AG 10' Predator - Manual (Page 44)

MAInTenAnce secTIon
Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected.
Only a minimum of time and effort is required to regularly lubricate and maintain this machine to
provide long life and trouble free operation.
wARnInG: always disengage the PtO before raising the Rotary Cutter for transporting or making
adjustments.
Lubrication
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. the
chart gives the frequency of lubrication in hours, based on normal operating conditions. Severe or
unusual conditions may require more frequent lubrication.
use an Sae multipurpose, lithium-type grease for all locations shown. Be sure to clean the fitting
thoroughly before using grease gun. Daily lubrication of the driveline slip joint is necessary. Failure
to maintain proper lubrication will result in damage to u-joints, gearbox, and/or driveshaft.