Modern AG 10' Predator - Manual (Page 23)

10' Predatorrr - 23
opeRATIon secTIon
Do noT use a PtO adapter to attach a non-matching Implement driveline to a tractor PtO. use of
an adapter can double the operating speed of the Cutter resulting in excessive vibration, thrown
objects, and blade and cutter failure. adapter use will also change the working length of the driveline
exposing unshielded driveline areas. Serious bodily injury and/or equipment failure can result from
using a PtO adapter. Consult an authorized dealer for assistance if the Implement driveline does not
match the tractor PtO.
never operate the tractor and Cutter if the Implement input driveline is directly connected to the
tractor transmission. tractor braking distances can be substantially increased by the momentum
of the rotating Cutter blades driving the tractor transmission even though the tractor clutch has
been disengaged. Install an over running clutch
between the tractor PtO and the Cutter driveline
to prevent this potentially dangerous situation.
Tire spacing
Refer to the tractor Operator’s manual or consult
an authorized dealer for instructions to change
tractor tire spacing.
GeTTInG on AnD oFF THe TRAcToR
Before getting onto the tractor, the operator must read and completely understand the implement
and tractor operator manuals. If any part of either manual is not completely understood, consult an
authorized dealer for a complete explanation.
Do not mount the tractor while the tractor is moving. mount the tractor
only when the tractor and all moving parts are completely stopped.
wARnInG
wARnInG
DAnGeR