Mercedes-Benz E-Wagon 2005 COMAND Manual - Manual (Page 96)

95
Telephone*
Telephone operation
If a name in the phonebook is stored
with the number of the highlighted call
it is shown in the status bar.
̈ Press the ABC soft key.
This switches the list to name display.
The number in the phone book that be-
longs to the highlighted name is shown
in the status bar.
Selecting a list entry and establishing the
connection:
̈ Use or to select the desired
entry.
̈ Press 0.
The telephone initiates the call to the
selected number.
On the multifunction steering wheel
Opening the list:
̈ Switch the multifunction display in the
instrument cluster to the Telephone
main display (
୴ page 25).
̈ Press s once.
The last dialed call is displayed on the
multifunction display.
Selecting a list entry and establishing the
connection:
̈ Press j or k repeatedly until
the desired entry is shown on the mul-
tifunction display.
̈ Press s .
The telephone initiates the call to the
selected number.
On the cellular phone, telephone numbers
can be stored in a speed dial memory
(
୴ Telephone Operation Guide).
You can retrieve the entries of the speed
dial memory via COMAND.
̈ Open the Telephone main menu
(
୴ page 89).
̈ Press a number key between 3 and
! and hold it for more than approx.
2 seconds.
The telephone establishes the connec-
tion with the stored number.
i
If you press s twice, the telephone
will immediately establish a connection
with the phone number dialed last.
Speed dial