Mercedes-Benz E-Wagon 2005 COMAND Manual - Manual (Page 86)

85
Telephone*
Telephone operation
̄ Telephone operation
Switching ON
The telephone is switched ON automatical-
ly when COMAND is activated. The cellular
phone must be readily inserted into the
cradle.
If COMAND is switched ON, the switched
OFF telephone can also be switched ON
manually:
̈ Press and hold for a few seconds
until the telephone is switched ON.
The Telephone main menu appears
(
୴ page 89).
One of the following messages could also
appear:
ț Please insert phone
̈ Insert the cellular phone into the
cradle.
ț Phone not installed
Your vehicle is not configured for cellu-
lar telephone operation.
ț Please insert SIM card
This message appears only when using
a GSM cellular phone.
̈ Insert a SIM card ( ୴ Telephone Op-
eration Guide).
Switching OFF
̈ In the Telephone main menu
(
୴ page 89), press and hold for
longer than 2 seconds.
or
̈ Switch COMAND OFF ( ୴ page 30).
The telephone switches OFF after a
one-minute delay. If a call is in progress
during this time, the telephone switch-
es OFF approx. one
minute after the
call is ended.
Switching the phone ON/OFF
i
If a call is in progress (handsfree) you
cannot switch the COMAND OFF,
. is
disabled.