Mercedes-Benz E-Wagon 2005 COMAND Manual - Manual (Page 42)

41
Audio
Radio operation
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
̈ Switch to the FM waveband
(
୴ page 37).
̈ Press 2.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
̈ Press the number buttons in
succession:
!, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered
(in this example: 98.5 Mhz) and
switches back to the FM menu.
Tuning via station search
Seven channels are available on the
Weather Band.
On COMAND control unit
̈ Switch to the WB waveband by press-
ing the
WB soft key in the Radio main
menu ( ୴ page 37).
i
Manual tuning is also possible in all
wavebands by pressing
or .
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
ț FM 0.2 MHz
ț AM 10 kHz
i
Entries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.
Tuning to a station on Weather Band
୴୴