Mercedes-Benz E-Wagon 2005 COMAND Manual User Manual
Page 41
40
Audio
Radio operation
̈
Use
, , or to choose a
preset and press
.
or
̈
Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.
Tuning via scan search
Scan search is characterized as follows:
ț
Scan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.
ț
Scan search plays each receivable sta-
tion for approx. 8 seconds.
ț
Scan search can be ended manually.
ț
Scan search automatically stops at the
station listened to before the scan
search was started.
Starting scan search
̈
Switch to the desired waveband
(
୴
page 37).
̈
Press the
Scan
soft key.
Scanning begins.
Ending Scan search manually
̈
Press the
Scan
soft key again.
Manual tuning
̈
Switch to the desired waveband
(
୴
page 37).
̈
Press and hold
- or , for at
least 2 seconds to tune up or down.
Manual tuning is activated.
̈
Keep the button pressed or release it
and keep tapping
- or , in
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.