Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 456)

455
Controls in detail
Driving systems
Adjustment in 1 mph (Canada: 1 km/h)
increments
̈ Briefly press the DISTRONIC Plus lever
down to the resistance point in direc-
tion of arrow
2 ( ୴ page 449).
̈ Release the DISTRONIC Plus lever.
The vehicle speed decreases in incre-
ments of 1 mph (Canada: 1 km/h).
Adjustment in 5 mph
(Canada: 10 km/h) increments
̈ Briefly press the DISTRONIC Plus lever
down past the resistance point in
direction of arrow
2 ( ୴ page 449).
̈ Release the DISTRONIC Plus lever.
The vehicle speed decreases in incre-
ments of 5 mph (Canada: 10 km/h).
Setting to last stored speed (“Resume”
function)
̈ Briefly pull the DISTRONIC Plus lever in
direction of arrow
4 ( ୴ page 449).
The DISTRONIC Plus resumes to the
last set speed, or if no speed is stored,
it will set and store the current speed.
̈ Remove your foot from the accelerator
pedal.
i The set speed value is decreased in 1 mph
(Canada: 1 km/h) increments each time you
press the DISTRONIC Plus lever down to the re-
sistance point.
i The set speed value is decreased in 5 mph
(Canada: 10 km/h) increments each time you
press the DISTRONIC Plus lever down past the
resistance point.
i The new speed is set and the vehicle will de-
celerate. Keep in mind that it may take a brief
moment until the vehicle has reached the set
speed.
Warning!
G
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to preset
speed could cause an accident and/or seri-
ous injury you and others.
i Upon switching off the engine, the last
stored speed is deleted.