beautypg.com

Safety systems, On-board computer and displays, Display messages – Mercedes-Benz G-Class 2011 Owners Manual User Manual

Page 216

background image

Safety systems

Display messages

Possible causes/consequences and M Solutions

ESP
Unavailable See

Operator's Manual

G

Risk of accident

ESP

®

(Electronic Stability Program) and therefore also PRE-

SAFE

®

are temporarily unavailable. The self-diagnosis function

might not be complete, for example. BAS (Brake Assist System)
has also been deactivated.
The brake system continues to function normally, but without the
functions listed above.

X

Carefully drive a short distance making slight steering
movements at a speed above 12 mph (20 km/h)
If the display message disappears, the functions mentioned
above are available again.

If the display message continues to be displayed:

X

Drive on carefully.

X

Visit a qualified specialist workshop.

ESP

®

and therefore also BAS and PRE-SAFE

®

are not available due

to undervoltage.
The brake system continues to function normally, but without the
functions listed above.

X

Drive on carefully.

X

Visit a qualified specialist workshop immediately.

If the display message is shown during the journey and the ä
warning lamp is flashing, then 4ETS (Electronic Traction System)
is deactivated. The brakes on the drive wheels could otherwise
overheat.

X

Let the brakes cool down until the display message disappears
and the ä warning lamp goes out.
4ETS is activated again.

ESP
Inoperative See

Operator's Manual

G

Risk of accident

ESP

®

and therefore also Brake Assist and PRE-SAFE

®

are not

available due to a malfunction. The d warning lamp also lights
up in the instrument cluster.
The brake system continues to function normally, but without the
functions listed above.

X

Drive on carefully.

X

Visit a qualified specialist workshop immediately.

214

Display messages

On-board computer and displays

BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike

Version: 3.0.3.5

2010-04-16T14:31:55+02:00 - Seite 214