Mercedes-Benz G-Class 2011 Owners Manual - Manual (Page 208)

X Press the W or X button to select
Km or Miles as the unit of measurement for
distance.
X Press the &, V or U button to
select a different display.
Selecting the language
The
Language function allows you to select
the language for the instrument cluster.
X Press V or U on the steering wheel
to select the
Settings menu.
X Press & to call up the selection of
submenus.
X Press W or X to select the
Instrument Cluster submenu.
X Press the & button to select Language.
X Press the W or X button to select the
desired language.
X Press the &, V or U button to
select a different display.
Selecting the status line display
X Press V or U on the steering wheel
to select the
Settings menu.
X Press & to call up the selection of
submenus.
X Press W or X to select the
Instrument Cluster submenu.
X Press & to select Status Line
Display.
X Press W or X to select the display in
the status line: speed (
Speed) or outside
temperature ( Outside Temperature).
The selected display now appears
constantly in the lower multifunction
display. When you scroll through the
Standard display menu (
Y page 202), you
will see the display you have not selected.
X Press the &, V or U button to
select a different display.
Time/date
Only vehicles without the navigation module
have this submenu. To set the time and date
on vehicles without the navigation module,
see the separate operating instructions.
In the
Time / Date submenu, you can set the
time and date.
X Press V or U on the steering wheel
to select the
Settings menu.
X Press & to call up the selection of
submenus.
X Press the W or X button to select the
Time / Date submenu.
X To set the clock: press & on the
steering wheel to select
Clock Set hour
or Clock Set Minute(s).
or
X To set the date: press & to select
Date Set day, Date Set Month or Date
Set Year.
X Press W or X to set a value.
X Press the &, V or U button to
select a different display.
Lighting
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the daytime running
lamps function and the light switch is in the
$ or à position, the daytime running
lamps are switched on automatically when
the engine is running.
In the dark, the following also light up:
R
the low-beam headlamps
R
the side lamps
R
the tail lamps
R
the license plate lamp
R the side marker lamp
On vehicles with daytime running lamps, the
factory setting is
On.
206
Menus and submenus
On-board computer and displays
BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike
Version: 3.0.3.5
2010-04-16T14:31:55+02:00 - Seite 206