beautypg.com

Memory functions, Storing settings, Calling up a stored setting – Mercedes-Benz G-Class 2011 Owners Manual User Manual

Page 116: Settings, Memory function, Function, Seats, steering wheel and mirrors

background image

Calling up a stored parking position

setting

X

With the key in position

2 in the ignition

lock and the exterior mirror on the front-
passenger side activated, engage reverse
gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.

The exterior mirror on the front-passenger
side moves back to its original position:

R

as soon as you exceed a speed of 6 mph
(10 km/h)

R

about ten seconds after you have
disengaged reverse gear

R

if you press button = for the exterior
mirror on the driver's side

Memory functions

Storing settings

With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:

R

position of the seat, backrest and head
restraint

R

driver's side: steering wheel position

R

driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides

G

Warning!

The memory function can still be used when
the key has been removed. For this reason,
children should never be left unsupervised in
the vehicle. They could otherwise become
trapped when adjusting the seat or the
steering wheel.

G

Warning!

Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic

conditions by the steering wheel and seat
moving of their own accord, and as a result
cause an accident.

X

Adjust the seat (

Y

page 100).

X

On the driver's side, adjust the steering
wheel (

Y

page 110) and the exterior mirrors

(

Y

page 112).

X

Press memory button

M and one of the

storage position buttons

1, 2 or 3 within

three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.

Calling up a stored setting

X

Press and hold the relevant storage
position button

1, 2 or 3, until the seat,

steering wheel and exterior mirrors are in
the stored position.

i

The setting procedure is interrupted as

soon as you release the storage position
button.

114

Memory functions

Seats, steering wheel and mirrors

BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike

Version: 3.0.3.5

2010-04-16T14:31:55+02:00 - Seite 114