Mercedes-Benz G-Class 2011 Owners Manual - Manual (Page 158)

Engaging park position P
X Push the DIRECT SELECT lever in the
direction of the arrow
P.
i Vehicles with a production date as of 18
January 2010: if you open the driver's door
when the vehicle is stationary or if the
speed is very low, the automatic
transmission shifts to park position
P
automatically.
! If the engine speed is too high or the
vehicle is moving, do not shift the
automatic transmission directly from
D to
R, from R to D or directly to P. The
automatic transmission could otherwise be
damaged.
Engaging reverse gear R
!
Only shift the automatic transmission to
R when the vehicle is stationary.
X Push the DIRECT SELECT lever up past the
first point of resistance.
Shifting to neutral N
X When the vehicle is stationary, depress the
brake pedal.
X Push the DIRECT SELECT lever up or down
to the first point of resistance.
When the engine is switched off, the
automatic transmission shifts to
N
automatically.
Remaining in neutral N
If you wish to keep the automatic
transmission in neutral
N, e.g. to wash the
vehicle in a car wash with a towing device,
observe the following:
Using the SmartKey:
R
make sure the ignition is switched on.
R when the vehicle is stationary, depress the
brake pedal and keep it depressed.
R
shift to neutral N.
R
release the brake pedal.
R if applied, release the parking brake.
R
switch off the ignition and leave the
SmartKey in the ignition lock.
Using KEYLESS-GO:
R
make sure the ignition is switched on.
R when the vehicle is stationary, depress the
brake pedal and keep it depressed.
R
shift to park position P.
R
release the brake pedal.
R remove the Start/Stop button from the
ignition lock.
R
insert the SmartKey into the ignition lock.
R
switch on the ignition.
R
depress the brake pedal and keep it
depressed.
R shift to neutral N.
R
release the brake pedal.
R
if applied, release the parking brake.
R switch off the ignition and leave the
SmartKey in the ignition lock.
Shifting to transmission position D
X Push the DIRECT SELECT lever down past
the first point of resistance.
Transmission position display
The current transmission position is shown in
the multifunction display.
: Transmission position
i The arrows in the transmission position
display show how and into which
transmission positions you can change
using the DIRECT SELECT lever.
156
Automatic transmission
Driving and parking
BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike
Version: 3.0.3.5
2010-04-16T14:31:55+02:00 - Seite 156