beautypg.com

Safety, Occupant safety – Mercedes-Benz CLA-Class 2015 User Manual

Page 47

background image

The shoulder section of the seat belt must

always be routed across the center of the

shoulder. Adjust the belt outlet if necessary.

X

To raise: slide the belt outlet upwards.

The belt outlet will engage in various posi-

tions.

X

To lower: hold belt outlet release ? and

slide belt outlet downwards.

X

Let go of belt outlet release ? in the

desired position and make sure that the

belt outlet engages.

All seat belts except the driver's seat belt are

equipped with a special seat belt retractor to

securely fasten child restraint systems in the

vehicle. Further information can be found

under "Special seat belt retractor"

(

Y

page 57).

Releasing seat belts
!

Make sure that the seat belt is fully rolled

up. Otherwise, the seat belt or belt tongue

will be trapped in the door or in the seat

mechanism. This could damage the door,

the door trim panel and the seat belt. Dam-

aged seat belts can no longer fulfill their

protective function and must be replaced.

Visit a qualified specialist workshop.

X

Press release button :, hold belt

tongue ; firmly and guide it back towards

belt outlet =.

Belt warning for the driver and front

passenger

The 7 seat belt warning lamp in the instru-

ment cluster is a reminder that all vehicle

occupants must wear their seat belts. It may

light up continuously or flash. In addition,

there may be a warning tone.
Regardless of whether the driver's seat belt

has already been fastened, the 7 seat belt

warning lamp lights up for six seconds each

time the engine is started. If, after

six seconds, the driver or front-passenger

seat belt has not been fastened and the doors

are closed, the 7 seat belt warning lamp

lights up. As soon as the driver's and front-

passenger seat belts are fastened or a front

door is opened again, the 7 seat belt

warning lamp goes out.
If the driver's seat belt is not fastened after

the engine is started, an additional warning

tone will sound. This warning tone stops after

six seconds or when the driver's seat belt is

fastened.
If the vehicle's speed exceeds 15 mph

(25 km/h) once and the driver's and front-

passenger seat belts are not fastened, a

Occupant safety

45

Safety

Z