Mercedes-Benz CLA-Class 2015 - Manual (Page 120)

Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
X To remove: switch off the lights.
X Turn the front wheels inwards.
X
Turn rotary knob : through 90°.
Cover ; is released.
X Push cover ; down.
X To install: push cover ; up.
X Turn rotary knob : through 90°.
Cover ; is locked.
Low-beam headlamps (halogen head-
lamps)
X
Remove the cover in the front wheel hous-
ing (
Y
page 118).
X Turn housing cover : counter-clockwise
and remove it.
X Turn bulb holder ; counter-clockwise and
pull out.
X
Take the bulb out of bulb holder ;.
X Insert the new bulb into bulb holder ;.
X Insert bulb holder ; and turn it clockwise.
X Press on housing cover : and turn it to the
right.
X
Replace the cover in the front wheel hous-
ing (
Y
page 118).
High-beam headlamps/daytime run-
ning lamps/parking lamps and stand-
ing lamps (vehicles with halogen head-
lamps)
X
Switch off the lights.
X
Open the hood.
X Turn housing cover : counter-clockwise
and remove it.
X
Turn bulb ; counter-clockwise and pull
out.
X
Insert the new bulb and engage it to the
stop.
X Press on housing cover : and turn it to the
right.
118
Replacing bulbs
Light
s
and
winds
hield
wiper
s