Mercedes-Benz CLA-Class 2015 - Manual (Page 268)

Folding the rear seat backrest forwards
and back
Folding the rear seat backrests forward
X
Fully insert the backrest head restraints
(
Y
page 99).
X Move the driver's or front-passenger seat
forward if necessary.
X
Pull left-hand or right-hand release han-
dle ; of the seat backrest forwards.
Corresponding seat backrest : is
released.
X
Fold backrest : forwards.
X
Move the driver's or front-passenger seat
back if necessary.
X Insert the seat belt into seat-belt holder :.
Folding the rear seat backrest back
! Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
X Move the driver's or front-passenger seat
forward if necessary.
X
Fold seat backrest : back until it engages.
Red lock status indicator ; is no longer
visible.
X
Adjust the head restraints if necessary
(
Y
page 99).
X
Move the driver's or front-passenger seat
back if necessary.
Securing cargo
Observe the following notes on securing
loads:
R Observe the loading guidelines
(
Y
page 262).
R
Secure the load using the cargo tie-down
rings.
R Distribute the load on the cargo tie-down
rings evenly.
R Do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-slip protection for light loads.
R Do not route tie-downs across sharp edges
or corners.
R
Pad sharp edges for protection.
266
Stowage areas
St
owage
and
fea
tu
re
s