Losi LOSB0217 Manual - Manual (Page 10)

Page 10
Rebuilding the Center Transmission
1. Remove both gear cover screws (1). Remove both front top plate screws (2).
2. Remove both rear top plate screws.
3. Remove the four lower chassis plate screws (1). Remove the four lower chassis plate screws (2).
4. Remove all four transmission mounting screws.
5. Slide the complete front end assembly out until the driveshaft slides out.
6. Slide the complete rear end assembly out until the driveshaft slides out.
7. Remove the transmission side-mounting screw from each side. Once the screws have been removed, the
transmission can now be removed from the chassis.
Complete Exploded View of Center Transmission
1 2 3
4
5 6
7
1
2
1
1 2