Losi LOSB0206BD Manual User Manual

Page 3

SETTING BATTERY

STEP

Choose the correct adaptor for your country and plug the charger
into the proper wall receptacle. Plug the battery pack into the charger
and let it charge for 3 hours for the ﬁrst time. After running, or when
the Mini Sprint slows noticeably, recharge the battery pack for 5 to 6
hours for a full charge.

Remove the transmitter battery cover by sliding the cover from left to
right. Install four (4) AA batteries into the battery holder. Pay close
attention to the correct direction of the positive (+) and negative (-)
ends as marked in the tray. Once all 4 batteries have been installed,
reinstall the battery cover by sliding it on from right to left.

Use the molded plastic key (included) to
turn the battery door lock 1/2 turn which
will allow the door to open.

Insert the power leads through the opening
in the back of the battery box as you install
the battery. Close the door and turn the
lock 1/2 turn to lock it shut.

Plug the ESC into the battery pack being
careful to use the keyed plugs correctly -
Do Not Force. If

This manual is related to the following products:

LOSB0206 Manual