Kontron KTT20-pITX - Manual (Page 21)

KTD-S0045-D Page 17 KTT20 Tool Package
KTT20/pITX Software Guide
4 KTT20 Tool Package
The KTT20 Tool Package contains all needed drivers and tools as described below. A short overview:
ICreator ImageCreater program (Windows
®
)
Convert.exe Console program (auxiliary program)
ImageCreator.exe Main program
‡
README.txt Important additional information
‡
SPI.cfg Configuration file
‡
SPI_Flasher.bin Special U-Boot flash version
NVFLASH_Linux
SDRAM Executes U-Boot in SDRAM
ktt20.sh Shell script file
SPI Programs U-Boot into SPI
TM
flash
spi.sh Shell script file
‡
KTT20.bct Binary configuration table file
‡
KTT20.cfg Configuration file
nvflash Main program
NVFLASH_Windows
SDRAM Executes U-Boot in SDRAM
KTT20.bat Batch script file
SPI Programs U-Boot into SPI
TM
flash
SPI.bat Batch script file
‡
KTT20.bct Binary configuration table file
‡
KTT20.cfg Configuration file
lipnv3p.dll Auxiliary file
lipnvaes_ref.dll Auxiliary file
lipnvapputil.dll Auxiliary file
lipnvboothost.dll Auxiliary file
lipnvdioconverter.dll Auxiliary file
lipnvflash.dll Auxiliary file
lipnvos.dll Auxiliary file
lipnvusbhost.dll Auxiliary file
nvflash.exe Main program