Kontron KTT20-pITX - Manual (Page 12)

KTD-S0045-D Page 8 U-Boot Setup
KTT20/pITX Software Guide
2.9 Summary Command
This Setup command gives a quick overview about all actual settings. An additional feature is the boot-
counter report.
Syntax:
setup summary
Example:
DISPLAY PART:
Boot display 1 : dvi
Boot display 2 : lcd
LCD resolution : wvga
Brightness : 128
Backlight enable level : high
DEVICES PART:
PCI Express interface : enabled
Audio interface : disabled
I/O interface : gpio
MISC PART:
Extended temp range : disabled
Temp alert output : disabled
Temp high limit : 80
Temp low limit : 0
Bootcounter : 100