Kontron CP305 BIOS - Manual (Page 87)

CP305 BIOS Chipset Setup
ID 1035-8356, Rev. 1.0 Page 77
P R E L I M I N A R Y
Memory Hole
This function is used to allocate the memory hole between the 15
th
and 16
th
megabyte.
Optimal and Fail-Safe default settings: Disabled
Boots Graphic Adapter Priority SDO
This function is used to select the VGA adapter to be used to display the POST messages.
Optimal and Fail-Safe default settings: PCI/IGD
Internal Graphics Mode Select
This function is used to select the amount of the main memory to share with the graphics con-
troller.
Optimal and Fail-Safe default settings: Enabled, 8 MB
SETTING DESCRIPTION
Disabled Use this setting to prevent the system from allocating a memory hole.
15 MB - 16 MB
Use this setting to allocate a memory hole between the 15 th and 16 th megabyte.
This setting is normally only required for the OS/2 operating system.
SETTING DESCRIPTION
PCI/IGD Use this setting to specify that if a PCI VGA adapter is available, it is used to display the
POST messages.
If no PCI/ VGA adapter is available, the internal graphics device is used to display the
POST codes.
IGD Use this setting to specify that the internal graphics device is always used to display the
POST messages.
SETTING DESCRIPTION
Enabled, 1 MB Use this setting to specify that 1 MB of main memory is used for the graphics controller.
Enabled, 8 MB Use this setting to specify that 8 MB of main memory is used for the graphics controller.
Disabled Use this setting to disable the Internal Graphics Controller.