Kontron CP305 BIOS - Manual (Page 60)

PCI/PnP Setup CP305 BIOS
Page 50 ID 1035-8356, Rev. 1.0
P R E L I M I N A R Y
OffBoard PCI/ISA IDE Card
This function is used to allow the OffBoard PCI/ISA IDE Card to be selected.
Note: It is recommended to leave this function at the default setting.
Optimal and Fail-Safe default settings: Auto
IRQs
This function is used to allow the IRQ settings to be modified. Each of these IRQs may be in-
dividually specified. To access IRQs that are not displayed, scroll the PCI/PnP Setup screen.
Optimal and Fail-Safe default settings: Available
SETTING DESCRIPTION
Auto Use this setting to auto select the location of an OffBoard PCI IDE adapter card.
PCI Slot1 Use this setting to select PCI Slot 1 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 1.
PCI Slot2 Use this setting to select PCI Slot 2 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 2.
PCI Slot3 Use this setting to select PCI Slot 3 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 3.
This setting is available even if the motherboard does not have a PCI Slot 3. If the motherboard
does not have a PCI Slot 3, do not use this setting.
PCI Slot4 This setting will select PCI Slot 4 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 4.
This setting is available even if the motherboard does not have a PCI Slot 4. If the motherboard
does not have a PCI Slot 4, do not use this setting.
PCI Slot5 This setting will select PCI Slot 5 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 5.
This setting is available even if the motherboard does not have a PCI Slot 5. If the motherboard
does not have a PCI Slot 5, do not use this setting.
PCI Slot6 This setting will select PCI Slot 6 as the location of the OffBoard PCI IDE adapter card. This
setting should only be used if there is an IDE adapter card installed in PCI Slot 6.
This setting is available even if the motherboard does not have a PCI Slot 6. If the motherboard
does not have a PCI Slot 6, do not use this setting.
INTERRUPT SETTING DESCRIPTION
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15 Reserved Use this setting to allow the specified IRQ to be used by a legacy ISA
device.
Available Use this setting to allow the specified IRQ to be used by a PCI/PnP
device.