Kontron CP305 BIOS - Manual (Page 100)

OEM Feature CP305 BIOS
Page 90 ID 1035-8356, Rev. 1.0
P R E L I M I N A R Y
Serial Port 1 SDO
This function is used to select the Serial Port 1 routing.
Note: This function is only effective on the CP305 rear I/O version.
Optimal and Fail-Safe default settings: Front
Gig. Ethernet 1 / Gig. Ethernet 2 SDO
This function is used to select the appropriate Gigabit Ethernet channel routing.
Note: This function is only effective on the CP305 rear I/O version.
Optimal and Fail-Safe default settings: Front
SATA Port SDO
This function is used to select the SATA port routing.
Optimal and Fail-Safe default settings: Onboard
SETTING DESCRIPTION
Front Use this setting to specify that the Serial Port 1 is routed to the COM connector on the front
panel of the 8HP CP305.
Rear Use this setting to specify that the Serial Port 1 is routed to the rear I/O module.
SETTING DESCRIPTION
Front Use this setting to specify that the front Gigabit Ethernet connector is active.
Rear Use this setting to specify that the Gigabit Ethernet channel is routed to rear I/O.
SETTING DESCRIPTION
Rear Use this setting to route the SATA port to rear I/O.
Onboard Use this setting to route the SATA port to the onboard connector.