Kontron CP305 BIOS - Manual (Page 86)

Chipset Setup CP305 BIOS
Page 76 ID 1035-8356, Rev. 1.0
P R E L I M I N A R Y
NORTHBRIDGE CONFIGURATION SCREEN
This screen provides functions for specifying the NorthBridge configuration settings.
Note: The NorthBridge Configuration setup screen varies depending on the supported
NorthBridge chipset.
DRAM Frequency
This function is used to set the DRAM frequency.
Note: It is not possible to raise the DRAM frequency above the maximum value allowed
by the SPD data, even if higher frequency settings are available.
Optimal and Fail-Safe default settings: Auto
SETTING DESCRIPTION
Auto Use this setting to allow the BIOS to determine the highest possible DRAM frequency using
the SPD data.
400 MHz Use this setting to limit the DRAM frequency to 400 MHz.
533 MHz Use this setting to limit the DRAM frequency to 533 MHz.