Kontron COMe-cTH6 User Manual

Page 59

COMe-cTH6 User’s Guide

www.kontron.com

USB Configuration

Feature

Options

Description

Legacy USB
Support

Disabled
Enabled

Enable or disable legacy USB device support

USB3.0 Support

Disabled
Enabled

Enable or disable USB3.0 (XHCI) controller support.

XHCI Hand-off

Disabled
Enabled

Enable or disable the workaround for operating systems without
XHCI controller handoff support

EHCI Hand-off

Disabled
Enabled

Enable or disable the workaround for operating systems without EHCI
controller handoff support

USB transfer time-
out

1 sec
5 sec
10 sec
20 sec

Select the timeout value for control, bulk and interrupt transfers

Device reset time-
out

10 sec
20 sec
30 sec
40 sec

Select the timeout value for USB mass storage device Start Unit
commands

Device power-up
delay

Auto
Manual

Configures the maximum time a device can take before it reports
itself to the host controller. Auto setting uses a default value: for a
root port it is 100ms. For a hub the delay is read from the hub
descriptor

Device power-up
delay in seconds

1 … 40 seconds

Specify the manual device power-up delay

DRAFT COPY FOR REVIEW ONLY