Onboard devices, Additional interfaces – Kontron COMe-cTH6 User Manual

Page 13

COMe-cTH6 User’s Guide

www.kontron.com

Watchdog Timer

WDT via CPLD

GPIO

Four GPIs and four GPOs available on the COM Express connector

SMBus

SMBus brought to the COM Express connector via FCH

C master with 7-bit I

C addressing with 100 KHz or 400 KHz operation and controller on

CPLD, for off- and on- module use

External BIOS ROM

Support for carrier board SPI devices (new with COM Express Rev 2)

Suspend Modes

Core Sleep States: S0, S3, S4, S5, S5 Eco

Wake

WAKE0#, WAKE1# support

TDP:

2.3W

Package:

24.5mmx24.5mm

3.1.6 Onboard Devices:

Ethernet:

Intel® I210-AT GbE Controller 10/100/1000 Mbit

LVDS

Analogix ANX3110 18/24-bit single/dual channel DP/LVDS Translator

CPLD

Altera EPM1270 CPLD

Watchdog Timer:

BIOS enables and configures watchdog in the CPLD

Hardware Monitor

Nuvoton NCT7904D chip

C EEPROM

AT24HC04B serial EEPROM for module parameter storage

TPM

Trusted Platform Module uses Atmel AT97SC3204 chip

Fan Header

Molex 53261-0371 3-pin header for consistency with Kontron Universal Cooling Solution

Power Management:

BIOS-enabled ACPI 4.0 power management for supported OSs

3.1.7 Additional Interfaces:

Passive Cooling:

Passive and Critical Trip Point

ACPI:

ACPI 4.0

Input Voltage:

Single supply support with wide range power supply input, 4.75V – 20V
5.0V supply is the optional standby power rail.

DRAFT COPY FOR REVIEW ONLY