Kontron MSM800SEL - Manual (Page 53)

MSM800SEV/SEL / Detailed System Description
www.kontron.com 51
If the system hangs or a problem appears, the following steps must be performed:
1. Reset the CMOS-Setup (disconnect the battery for at least 10 minutes).
2. Press ESC until the system starts up.
3. Enter the BIOS Setup:
a. load DEFAULT values
b. enter the settings for the environment
c. exit the setup
4. Restart the system.
The user may access the EEPROM through the INT15 special functions. Refer to that chapter in the
BIOS/Driver/Software manual "GEODE LX800 / LX900" on the Product CD.
The system information is read-only and uses the SFI functions. Refer to the "GEODE LX800 / LX900" manual.
6.12.1 EEPROM Memory for Setup
The EEPROM is used for setup and configuration data, stored as an alternative to the CMOS-RTC. Optionally, the
EEPROM setup driver may update the CMOS RTC, if the battery is running down and the checksum error would appear
and stop the system. The capacity of the EEPROM is 2 kByte.
Organization of the 2048Byte EEPROMs:
Address Map Function
0000h CMOS-Setup valid (01=valid)
0001h Reserved
0003h Flag for KCC-Message (FF=no message)
0010h-007Fh Copy of CMOS-Setup data
0080h-00FFh Reserved for AUX-CMOS-Setup
0100h-010Fh Serial-Number
0110h-0113h Production date (year/day/month)
0114h-0117h 1. Service date (year/day/month)
0118h-011Bh 2. Service date (year/day/month)
011Ch-011Fh 3. Service date (year/day/month)
0120h-0122h Boot errors (Auto incremented if any boot error occurs)
0123h-0125h Setup entries (Auto incremented on every Setup entry)
0126h-0128h Low battery (Auto incremented every time the battery is low, EEPROM -> CMOS)
0129h-012Bh Startup (Auto incremented on every power-on start)
0130h Reserved
0131h Reserved
0132h/0133h BIOS Version (V1.4 => [0132h]:= 4, [0133h]:=1)
0134h/0135h Board Version (V1.5 => [0124h]:=5, [0125h]:=1)
0136h Board type (‘M’=PC/104, ‘E’=Euro, ‘W’=MSWS, ‘S’=Slot, ‘C’=Custom, ‘X’= smartCore or smartModule)
0137h CPU type: (01h=ELAN300/310, 02h=ELAN400, 05h=P5, 08h=P3, 09h=ELAN520, 10h=P-M).
0200h-03FFh Reserved
0200h-027Fh Reserved
0400h-07FFh Free for Customer use
6.13 Memory & I/O Map
6.13.1 System Memory Map
The X86 CPU, used as a central processing unit on the MICROSPACE, has a memory address space which is defined by
32 address bits. Therefore, it can address 1GByte of memory. The memory address map is as follows: