7 bios setup, Bios setup – Kontron MSM800SEL User Manual

Page 28

Text mode
Original mode

MSM800SEV/SEL

/ Quick Start Guide

www.kontron.com

4.7 BIOS Setup

Since the BIOS is auto-configuring during the start-up procedure, the user normally does not enter the BIOS setup.
Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS manual printed
from the Product CD for the BIOS setup details.

Note:

For the MSM800SEL:

The RTC clock and date must be adjusted in the BIOS setup after the external
battery is connected to the board.

4.8 Boot Up the Operating System and Install the Drivers

Depending on which boot drive is available, boot up the operating system from the CompactFlash, hard disk, or floppy
disk.

To install the drivers, see the BIOS/Driver/Software manual on the Product CD.

This manual is related to the following products:

MSM800SEV