beautypg.com

5 technical specification, 5 technical specification - 9, Am4022 introduction – Kontron AM4022 User Manual

Page 27

background image

AM4022

Introduction

ID 1052-0183, Rev. 1.0

Page 1 - 9

1.5

Technical Specification

Table 1-2: AM4022 Main Specifications

AM4022

SPECIFICATIONS

Processor and Memory

CPU

The AM4022 supports the following 3rd generation Intel® Core™ processors:

Intel® Core™ i7-3612QE (SV) processor with ECC, 2.1 GHz, 6 MB L3 cache

Intel® Core™ i7-3555LE (LV) processor with ECC, 2.5 GHz, 4 MB L3 cache

Further processor features:

Up to four physical execution cores

Intel® Hyper-Threading Technology (Intel® HT Technology)

Intel® 64 Architecture

Intel® Turbo Boost Technology

Intel® Intelligent Power Sharing (IPS)

System Memory interface with optimized support for dual-channel
DDR3 SDRAM memory at 1600 MHz with ECC

Integrated 2D and 3D Graphics Engines

DMI and FDI interfaces to the Intel® QM77 chipset

One x16 PCI Express port operating at up to 8.0 GT/s

Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the AM4022.

Memory

Main Memory:

Up to 8 GB, dual-channel DDR3 SDRAM memory with ECC running at
1600 MHz

Cache Structure:

64 kB L1 cache for each core

32 kB instruction cache

32 kB data cache

256 kB L2 shared instruction/data cache for each core

Up to 6 MB L3 shared instruction/data cache shared between all cores

Flash Memory:

Two SPI Flash chips (2 x 8 MB) for two separate uEFI BIOS images se-
lectable via the IPMI controller or the DIP switch SW3

Mass Storage Device:

Up to 64 GB NAND Flash via an optional onboard Serial ATA Flash
module

Serial EEPROM with 64 kbit

Chi

ps

et

Intel® QM77

Mobile Intel® QM77 Express Chipset:

Eight x1 PCI Express 2.0 ports (not used on the AM4022)

SATA host controller with six ports; two with 6 Gbit/s and four with 3
Gbit/s data transfer rate and RAID 0/1/5/10 support (only four ports
are used on the AM4022)

USB 2.0 host interface with 14 USB ports available (only four ports are
used on the AM4022)

USB 3.0 host interface with 4 USB ports available (only one port is used
on the AM4022)

SPI Flash interface support

Low Pin Count (LPC) interface