Kontron AM4022 - Manual (Page 22)

Introduction AM4022
Page 1 - 4 ID 1052-0183, Rev. 1.0
The board is offered with various Board Support Packages including Windows and Linux
operating systems. For further information concerning the operating systems available for the
AM4022, please contact Kontron.
1.2 Board-Specific Information
Due to the outstanding features of the AM4022, such as superior processing power and flexible
interconnect topologies, this AMC board provides a highly scalable solution not only for a wide
range of telecom and data network applications, but also for several highly integrated industrial
environment applications with solid mechanical interfacing.
Some of the AM4022's outstanding features are:
• Support for the following 3rd generation Intel® Core™ quad- and dual-core processors:
• Intel® Core™ i7-3612QE (SV) processor with ECC, 2.1 GHz, 6 MB L3 cache
• Intel® Core™ i7-3555LE (LV) processor with ECC, 2.5 GHz, 4 MB L3 cache
• Intel® QM77 Express Chipset
• Up to 8 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1600 MHz
• Integrated 3D high performance graphics controller
• Display support for resolutions up to 2560 x 1600 pixels @ 60 Hz
• AMC interconnection:
• Dual Gigabit SerDes connection in the Common Options Region
• Dual SATA storage interface in the Common Options Region
• Two x4 or one x8 PCI Express interface in the Fat Pipes Region (up to 8.0 GT/s and
as a root complex controller only)
• One SATA storage interface in the Extended Options Region
• DisplayPort interface (on request) in the Extended Options Region
• One USB 3.0 and three USB 2.0 (all on request) in the Extended Options Region
• Serial port in the Extended Options Region
• PCI Express reference clock (FCLKA) either output to host or non-synchronized ex-
ternal input
• Full hot swap support
• One Quad Gigabit Ethernet Controller, Intel® I350
• Onboard extension connector for either an optional SATA Flash module with up to 64 GB
NAND Flash memory or an optional battery module for RTC backup
• One mini USB 2.0 host port on Front I/O
• Two Gigabit Ethernet ports on Front I/O
• One Serial port (RS-232) or DisplayPort on Front I/O, depending on the front panel version
• TCG 1.2-compliant Trusted Platform Module (TPM) (on request)
• Two SPI Flash chips (2 x 8 MB) for two separate uEFI BIOS images:
• One standard SPI boot flash
• One recovery SPI boot flash
• Dedicated IPMI Module Management Controller with redundant Firmware Flash (2 x 512 kB)
• Watchdog Timer
• Four bicolor User-Specific LEDs (providing debugging and POST code information, etc.)
• Two onboard DIP switches SW2 and SW3 (for selecting the SPI boot flashes, overwriting
E-Keying, etc.)
• Standard temperature range: - 5°C to + 55°C
• Extended temperature range: - 40°C to + 70°C (on request)
• Thermal management and passive heat sink solution for forced airflow cooling
• Single Mid-size and Full-size AMC module with or without retaining screws
(Full-size and front panels with retaining screws on request)
• AMI Aptio®, a uEFI-compliant platform firmware