Kontron AM4022 - Manual (Page 25)

AM4022 Introduction
ID 1052-0183, Rev. 1.0 Page 1 - 7
1.4.2 Front Panel
Figure 1-2: AM4022 Mid-size Front Panel Versions
For further information on the LEDs used on the AM4022, refer to section 2.10.1, “Front Panel
LEDs”.
Note ...
On request, the AM4022 is available with retaining screws on the front panel as
well as in full-size versions with or without retaining screws.
Module Management LEDs Connectors
• LED1 (red): Out-of-Service LED
• LED2 (red/green/amber): Health LED
• HS LED (blue): Hot Swap LED
• Serial Connector
• DisplayPort Connector
• Gigabit Ethernet Connector
• Mini-USB Connector
User-Specific LEDs
• ULED3 (red/green): AMC Ethernet port A link signal status, AMC port 0 (green) + POST
• ULED2 (red/green): AMC Ethernet port B link signal status, AMC port 1 (green) + POST
• ULED1 (red/green): SATA channels active (green) + POST
• ULED0 (red/green): POST
Note ...
If one or more of the ULEDs 0..3 remain lit or blinking red, a failure is indicated.
For further information, please contact Kontron.
D
P
3
2
1
0
0
1
2
3
AM4022
GbE D
GbE C
AM4022
GbE D
GbE C
0
1
2
3
AM4022
with COM Port
AM4022
with DisplayPort
D
P