2 sensor thresholds, 3 field replaceable unit (fru) information, Field replaceable unit (fru) information – Kontron AM4211 User Manual

Page 51: Table 5-7 voltage sensor thresholds

AM4211

www.kontron.com

5.1.2.2

Sensor Thresholds

Following table shows sensor thresholds for voltages

Table 5-7:Voltage sensor thresholds

5.1.3

Field Replaceable Unit (FRU) Information

This FRU information contains the IPMI defined Board and Product Information areas that hold the part
number and serial number of the board and the Multirecord Information Area that contains the PICMG
defined Module Current Requirement Record, the AMC Point-to-Point Connectivity Record and the Clock
Configuration Record.

The Internal Use Area is pre-allocated to 384 bytes and is free for customer use.

This FRU information responds to FRU ID #0, which is the ID for the MMC.

SENSOR Number / ID string

Lower Non-Re-
coverable

Lower criti-
cal

Lower non crit-
ical

Upper non
critical

Upper
critical

Upper Non-Re-
coverable

Vcc +3.3VSUS

2.802V

2.955V

3.623V

3.806V

Vcc +12V In

8.152V

9.826V

14.244V 15.918V

Vcc Vcore

0.987V

1.087V

1.165V 1.230V

Vcc +1.1V

0.971V

1.032V

1.170V 1.231V

Vcc +1.5V

1.321V

1.423V

1.579V 1.681V

Vcc +1.8V

1.062V

1.682V

1.920V

2.540V

Vcc VTT_DDR

0.643V

0.682V

0.821V

0.860V

Vcc +2.5V

2.197V

2.342V

2.660V

2.805V

Vcc +1.2V

0.907V

1.120V

1.312V

1.525V

Vcc +1.0V BCM

0.569V

0.932V

1.051V

1.414V

Vcc +3.3V

2.951V

3.093V

3.512V

3.654V

Vcc +1.2V SUS

1.053V

1.114V

1.289V

1.350V

Vcc +5V

4.126V

5.597V

Note:

Lower non critical and upper non critical values are not set to ensure no error in normal operation.

Note:

Vcc +1.8V Sensor is only monitored when the SyncE option is installed.